Cambridge University press
Cambridge University press visitors car park
Summit landscapes recently completed a visitor’s car park for Cambridge university press, the car park had bollards with key and lock bollards and was difficult to use. The system now in place is simpler and a lot easier for visitors to the university.
The project involved digging a trench for the power and data cables, installing lamp posts, line marking new visitor parking bays and installing rising bollards. We also installed Bendy bollards which, following an impact, rise back to their upright position undamaged.
Each bollard is made from 60% recycled rubber, are maintenance free, long lasting and are flexible yet extremely strong.
Scope of works:
Before work commenced a utility record search and a comprehensive scan of the site was necessary looking for cables, ducting and drainage using Cat and Genny while digging.
Trench to run power and control cables
– Approx. 95m trench
– Excavate trench from power source to exit barriers as per drawing
– Spur off for 4x lamp posts
– Cutting surface with road saw, breaking out
– 2x ducting installed for power and data cables
– Ground to be compacted and back filled.
– Excavate and break out 8x bases
– Pour and float concrete for barriers to be bolted down
– Set lamp posts in place
– C45 concrete with synthetic fibres used.
Bollards with stainless steel sleeves
– Supply and install x34 bollards
– Core drilled and concreted into place
Line Marking new parking bays
– Paint marker applied to new parking bay and disabled bay
– Islands painted in yellow lines
– White or yellow colour